Self-intellectual property Support UHF EPC Gen2(ISO18000-6C),ISO18000-6B protocol tags Advanced tag processing algorithm, high identification rate Built-in antenna with effective distance up to 180mm* Low power dissipation design Optional USB interface
Self-intellectual property Support ISO18000-6C (EPC C1G2),ISO18000-6B protocol tag 902~928MHz frequency band(frequency customization optional) FHSS or Fix Frequency transmission RF output power up to 30dbm(adjustable) Built-in wideband antenna with effect distance up to 500mm* Support auto-running and interactive work mode Low power dissipation with...
LS - Bracket For narrow door frame Applicable for EM Lock 1200 Features Dimension : 266mm (L) X 50.5mm (W) X 50.5mm (H) Thickness : 6mm Weight : 0.380kg
Figure U Dimension : 185mm(L) X 30mm(W) X 61mm (H) Thickness : 10mm (A) & 4mm (B) Weight : 0.480kg Figure I Dimension : 150mm (L) X 50.8mm (W) Thickness : 1.58mm Weight : 0.038kg U - Bracket For frameless glass doors Applicable for EM Lock 1200
FEATURES Dimension : 250mm (L) X 38mm(W) X 38mm (H) Thickness : 4mm Weight : 0.180kg LS - Bracket For narrow door frame Applicable for EM Lock 600
Dimension : 180mm (L) X 92mm (W) Thickness : 4mm Z - Bracket Applicable for Water Proof EM Lock 600
Figure U Dimension : 180mm (L) X 24mm (W) X 39mm(H) Thickness : 6mm (A) & 3mm (B) Weight : 0.200kg Figure I Dimension : 125mm (L) X 31.8mm (W) Thickness : 1.2mm Weight : 0.014kg
D-805 4 reader expansion board is one of four expansion boards (R/S/D/P-805) for the advanced AC-825IP networked controller. Ideal for residential and commercial applications, The D-805 expansion board increases flexibility to the access control system by adding four readers, four doors, four relay outputs and eight supervised inputs to the controller.
Incorporates the ISO-14443A (MIFARE Classic EV1) ID Format Protocol Read range of up to 70 mm (2.8 in.) Backlit 3×4 keypad 8 programmable Proximity Card transmission formats, Wiegand 26- to 40-Bit or Clock & Data
Flexibility with the option to select models with Dallas iButton ID chip (GA-01/AT-32B) Rotating RS-232 9-pin serial port with a 3 mm Barrel socket Full duplex RS-232 communication at 9600 baud Small desktop footprint with rubber feet
Durable, highly rugged and waterproof (Meets IP-68 level tests) The sealed ID chips’ internal code cannot be altered or replicated Plastic casing easily attaches to any solid, flat surface with screws, glue or double coated tape Light-weight, portable keyfob with keychain attachment
Flexibility with the option to select models with Dallas iButton ID chip (GA-01/AT-32B) Tamper evident seals Polycarbonate and carbon-hardened stainless steel casing, ensuring its light-weight, portability, and durability High capacity, can hold 8,000 events in non-volatile memory
The HID VertX Products provide a complete and fully featured hardware/firmware intrastructure for biometric access control software host systems. The HID VertX V200 Input Monitor Interface conects upto 16 supervised input circuits. Each input point monitors and reports normal, off-normal, and alarm states.
The HID VertX V300 Output control Interface conects 12 latching Form-C relays, which can connect up to 12 devices controllable by simple contact closures, such as logic inputs for process equipment, HVAC and elevator control panels, CCTV Switchers, etc. Loads exceeding 2 A @ 30 VDC should be controlled via interposing relays.