The Wireless Signal Repeater is a device that amplifies a signal before transmitting it again. It special for increasing the wireless signal transmit range. The Wireless Signal Repeater can repeat 36 different frequency wireless signals in the same time. It’s very popular in the wireless range products and solutions.
Compatible with all PowerSeries control panels Bi-directional RS-232 interface Real-time zone status Fully programmable 4-wire hook-up to KEYBUS Enables third parties to perform virtual keypad functions Enables third parties to perform thermostat control functionality via the DSC Escort module
The TL300 is compatible with any control panel, via the Ring and Tip connection, that uses the Contact ID format and follows the Contact ID specifications of 40 ms/60 ms on/off time. Direct trigger inputs of the TL300 can be controlled by outputs on any control panel.
The AFT-100 glassbreak simulator provides the most reliable and accurate indication of the correct mounting location for the detector. Do not install the detector beyond the maximum recommended range, even if the glassbreak simulator reports additional range. Future changes in room acoustics could reduce any additional range.
PowerSeries Power Supply Modules Fully supervised for AC failure, low battery and AUX failure Compatible with all PowerSeries control panels Connect one PC5204 and up to four PC5200 supervised modules on a system Provides up to 1 Amp @ 12 VDC Compatible with PC1616, PC1832 and PC1864 control panels
PowerSeries TouchScreen Security Interface Features 7" full color display Slim modern design (800x480 resolution) Intuitive LED indication of security system status Picture frame feature Clock feature Output control Intuitive user interface Customizable home screen and wallpaper Menu user programming Installer programming Virtual keypad
Wireless Repeater Features Greatly extends the range of DSC 1-way wireless devices Compatible with IMPASSASpecifications Quick enrolment of DSC 1-way wireless devices Status LEDs for AC, battery and RF Jam Up to four repeaters can be installed for each panel/receiver WS4920 supports up to 164 wireless devices Wall and case tamper protection...
Features Available in 13 languages Global Partition Status Full 32-character programmable labels Modern, slim-line landscape keypad Enlarged keypad buttons 5 programmable function keys 3 one-touch emergency keys Multiple door chime per zone Wire channel Easy-to-install mounting hinge AC status ICON
PowerSeries Wireless Receivers Features Supports 32 wireless zones, 16 wireless keys All wireless detectors are fully supervised for communication integrity Compatible with PC1616, PC1832 and PC1864 control panel RF5132-433 is compatible with PC585, PC1616, PC1832 and PC1864 control panels Available in both 433 MHz and 868 MHz
64-Zone LCD Full-Message Keypad Features Full 32-character programmable labels Modern, slim-line landscape keypad Enlarged keypad buttons 5 programmable function keys Intuitive clock programming* 3 one-touch emergency keys Multiple door chime per zone Adjustable backlight and keypad buzzer Wire channel Easy-to-install mounting hinge Surface or...
PowerSeries Power Supply Modules Fully supervised for AC failure, low battery and AUX failure PC5204 adds 4 programmable high current voltage outputs: rated at 1 Amp @ 12 VDC, output #1 can be used as a supervised bell output Compatible with all PowerSeries control panels Connect one PC5204 and up to four PC5200 supervised modules on a system Provides up...
Features Speaks system status and zone information Zones and system events displayed in plain English Family message center Large, easy-to-use keypad No confusing blinking lights Four programmable function keys Keys continuously backlit for visibility White with removable door; fits any décor
FEATURES Can be used on controls that support up to 250 zones Each zone is identified by a unique serial number, which is assigned via on-board DIP switches Detects faults on all zones within 400ms of occurence Loops A & B can be programmed for fast (10ms) response Provides cover tamper protection, which may be enabled or disabled via on board DIP switches
Features Uniquely identifies eight EOLR supervised zones (all zones use 10K resistors, supplied) DIP Switches can be used to set zone numbers or serial numbers When used in the serial number mode, each serial number in the selected group can be assigned to any zone number Loops A & B can be programmed for fast (10msec) response
The 4209U Group Zoning Module streamlines large or expanded system installation. In retrofit applications, installers can utilize existing hardwired smoke detectors (UL Compatibility Listed) and wiring to expand system-wide smoke detector capability and capacity. The 4209U also offers flexible zone configurations to meet the varying demands of commercial...
Isolate open and short circuit faults from main V-Plex loop Provides additional V-Plex loop current V-Plex loop isolation between primary and extended loop Fully supervised Separate DC input, no current drain from primary V-Plex loop Monitors DC power input