This is the perimeter protection for the wall or glass or and other buildings. The vibration sensor is usually installed on doors and windows and walls. The vibration sensor operates on the principle that when the door or window or walls vibrated by the intruder shock or dig, will trigger a signal to alarm system.
The Glass Breakage Sensor is An INPUT DEVICE which is triggered by the sound of breaking glass. This is the perimeter protection for the windows or glass or and other buildings. The glass break sensor is usually installed on glass doors and windows and glass walls.
Newly-developed dual element passive infrared sensor unit Wireless transmitting digital signal to control panel Intelligent logic control, eliminate false alarm Low power indication by LED indicator Microcontroller temperature analysis and Automatic temperature compensation for best summertime detection Tightly-mated bug guard to protect the sensor optics...
The wireless Ceiling PIR Motion detector is an INPUT DEVICE, The CPIR- 100B PIR motion detector is designed to provide detection of criminal intrusion through door frames and window frames into a protected area by sensing infrared energy (heat) emitting from an intruder’s body moving through a protected area.
Standalone/Wireless Smoke Sensor is an input device used for fire detection which is triggered by smoke. The two main types of smoke detectors are photoelectric and ionization. It can use independently or as a front-end detector of an alarm system.
The Wireless Gas Leakage Detector is an input device designed for natural gas, LPG detection. It can use independently or as a front-end detector of an alarm system. Upon detection of natural gas and LPG, this device automatically generates an alarm signal to control panel and sound & flash alarm.
Wireless Water Leakage Detector is a very useful unit, it can work standalone as well as work with the alarm panel. Low power consumption and high sensitive, easy to install, usually it will be installed under the water valve or water pipe to monitor the water leakage. It can use independently or as a front-end detector of an alarm system.
The Wireless Signal Repeater is a device that amplifies a signal before transmitting it again. It special for increasing the wireless signal transmit range. The Wireless Signal Repeater can repeat 36 different frequency wireless signals in the same time. It’s very popular in the wireless range products and solutions.
This is the perimeter protection for the premises. The magnetic contact is usually installed in exterior opening doors and windows that are reachable from the ground (or from another part of a building which is accessible from the ground - such as a garage).
Wireless Shock Sensor with Built-in Door/Window Contact Features • Electro-mechanical shock sensor • Adjustable sensitivity • Audible and visual pre-alert • Built-in reed switch and case tamper • Functions as a door/window contact • 5/8” (16 mm) maximum magnet gap • Long-life lithium battery included • Mounting plate included • Reliable 433 MHz...
The AFT-100 glassbreak simulator provides the most reliable and accurate indication of the correct mounting location for the detector. Do not install the detector beyond the maximum recommended range, even if the glassbreak simulator reports additional range. Future changes in room acoustics could reduce any additional range.
The LC-171 is a unique motion detector utilizing dual passive infra-red elements and Microwave technology and is designed for outdoor use in the most severe climatic conditions. The LC-171 can also accommodate pets.
The LC-151 is a unique motion detector utilizing a single passive infra-red element and Microwave technology and is designed for outdoor use in the most severe climatic conditions. The LC-151 can also accommodate pets with the addition of optional pet immunity lenses
Digital signal analysis for consistent detection throughout the coverage pattern Digital temperature compensation for improved catch performance at critical temperatures Patented Multi-Level Signal Processing (MLSP) for accurate detection of human IR energy over a broad range of temperatures Optional mounting brackets available: DM-W (wall-mount bracket)...
Features: • Multi-Level Signal Processing * • 360° coverage • Quad element PIR sensor • High level static and transient protection • Excellent RF immunity • Temperature compensation • Fast/Slow detection jumper • LED ON/OFF jumper • SMD construction • Super quiet operation • 5 year warranty
The DG-50 is equipped with multilevel discriminating circuitry to maximize its response to breaking glass and minimize its response to normal environmental noises. As well, the DG-50 is extremely resistant to seismic shock and will not alarm in response to a slamming door or even a tap on the case.