Features Integral sensor shorting link Separate loop in and loop out terminals Stand off fixing feature Accepts side entry cables Selectable sensor locking feature Benefits Quick and simple to install Common mounting base for Cooper intelligent addressable sensors Positive "lock" indication multiple cable entry points Easy to maintain/service
The intelligent addressable sounder base (CAS380) can be used both with a sensor or as a stand alone device. The CAS380 is compatible with the Cooper range of intelligent addressable sensors and fire systems.
The B401 is a 2-wire base for use with 400 Series smoke detectors.
The Isolator Base is a bidirectional protection device to be installed between every 16 no’s of devices to isolate the circuit from single short circuit and keep the system working normally except those short circuited area. This is non addressable device, having yellow LED indications on the base.
The Context Plus Common Base is designed to accept DIL switch addressed smoke Optical and Temperature detectors. Polarity must be observed as indicated. A self adhesive label is provided with each base to mark the detector address. If you require remote LED indication, an additional remote LED driver PCB assembly must be used, part no. 43781-089 (driver...
VECTOR ADDRESSABLE BASE SOUNDER Attractive low profile design Three Evacuate tones (continuous, warble or sweep) and one Alert tone Volume adjustable from 91dB downwards ‘Master’ or ‘shadow ’ mode operation (allows multiple shadow sounders to be given the same ID address as one ‘master’ sounder, a useful feature on heavily populated systems and to give...
Detector Base Part Number: DZ03 Description: GST Standard Base Weight / Kg.: 0.059 Pack Qty. per Box: 100
Addressable Sounder Beacon Base Features and Benefits Loop powered no additional cabling required. Sound level 92dB/1m 16 programmable tones Early notification setting for sleeping areas Sandwich design Electronically addressed Ceiling mounted, easy plus installation
Features Integral sounder base Integral high output LED beacon Integral sensor mounting base Can be used with a sensor or stand alone Selectable tones controlled by the panel Adjustable volume controlled by the panel Optional cover plate available Benefits Saves time and installation costs Single point connection for sensor, sounder and LED strobe
The CB2E and CB have been specifically designed to be compatible with the UL range of conventional detectors. Both bases have been designed for flexibility, simplicity and speed of installation.
Features for 2151/B114LP/B114LPBT • Low-profile smoke detector design • Low standby current • Two LEDs blink in standby • Detector head plugs easily into base • Designed for mounting on a standard electrical box • Removable cover and insect screen for field cleaning • Accepts 24 or 120V supply voltage
Model: B114LP Type: Bases; Accessories; Special Applications 120VAC detector base for use with 2151 Special Applications Duct Smoke Detector.
Low Frequency (520 Hz) Intelligent, Syncronizable, Sounder Base designed for new and existing dwelling unit applications.
Low Frequency (520 Hz) Intelligent Reversible, Sounder base designed for new and existing dwelling unit applications.
Eclipse Series sounder base. Alarm Current : 27 mA maximum Operating Humidity Range : 10% to 93% Relative Humidity Operating Temperature Range: 32° to 120°F (0° to 49°C) Power Supply Voltage :16 to 33 VDC Shipping Weight : 0.4 lb. (181 gm) Sound Output : Greater than 85 dBA measured in UL reverberant room. Standby Current : 7.0 mA maximum
Eclipse Series Relay Base.
Eclipse Series Flangeless Mounting Base - Isolator Version.
Eclipse Series Flanged Mounting Base - Isolator Version. Dimensions : 6.1 inches (155mm) dia. Wire Gauge : 12 to 18 AWG (0.9 to 3.25mm<sup>2</sup>)